OVERVIEW:
Duralite Diamond Drills are constructed from only the best quality materials and are designed to be both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to afford the most efficient disassembly, transport, and re-assembly possible. The total operational weight of the Duralite 1000N is only 9,295lbs (4,215 kg).
SPEC SHEET
| PERFORMANCE | WIRELINE HOIST(with Guarding) |
| Depth capacity* for diamond drilling: B2 3/16″(55.6MM) 4,265ft (1,300 M) N 2-3/4″ (69,9MM) 3,281ft (1,000M) H 3-1/2″ (88,9M) 2,559ft (780M) *Drilling capacity is based on a 45° – 90° hole and will depend on in-hole tools, ground conditions, drilling techniques and equipment used. | The wireline winch is manufactured out of aluminum and is driven by a low speed, high torque hydraulic motor providing variable speed. CABLE CAPACITY: 3/16″ (4.88M): 4,500′(1,372M) PULL CAPACITY: 2,000Lbs (907Kg) |
| STANDARD ENGINE | Rod Handling Winch (with Guarding): |
| Diesel John Deere 170Hp at 2,200 RPM | Cable capacity: 3/8″ :100′ (30.5M) Pull capacity: 300LBS (136Kg) |
| HYDRAULIC MODULE | FEED FRAME AND BASE(with Guarding): |
| Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accessories. This hydraulic system delivers 71 GPM at 2,200 RPM. | Head Stroke: 60 Inches (1.52M) Pull Capacity: 29,000 lbs@3,500 PSI ; 13,150 kg @3,500 PSI Possible drilling angles: 45° to 90° |
| ROTARY HEAD, CHUCK AND ROD HOLDER: |
| Holding Capacity (head): 26,000 lbs (11,790 kg) |
| Maximum Rod Size (head): 3,5” (89 mm) |
| Chuck Operation: Spring closed and hydraulically opened |
| Final Drive: Gear driven |
| Hydraulic motor: Variable (160CC) |
| Transmission: Hi-Lo 2 Speed manual |
| Gear Ratio: High: 3.0:1 Low:5.4:1 |
| Lubrication: Pumped oil, filter and cooler |
| Fabrication: Steel |
| Speed: Variable up to 1,500 RPM |
| Weight | Lbs. | Kg. |
| Power Unit C/W Guarding | 1,715 | 778 |
| Hydraulic Module | 1,590 | 721 |
| Feed frame with mounts | 1,480 | 671 |
| Tower base C/W winches (no cable) (+ 350lbs for cable) | 820 | 372 |
| Tower | 570 | 258 |
| Drill head assembly C/W motor & hoses (B20) | 1,100 | 499 |
| Rod clamp assembly | 230 | 104 |
| Fibreglass floors | 1,160 | 526 |
| Foundation beams | 630 | 286 |
| Total Weight | 9,295 | 4,215 |
English 
Spanish