OVERVIEW:
Duralite Diamond Drills are constructed from only the best materials and are designed to the both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to affort the most efficient disassembly, transport, and re-assembly posible. The total operationaL wight of the Duralite UG 800N is the 6,166lbs (2797kg).
SPEC SHEET
| PERFORMANCE 45º to 90º NEGATIVE | WIRELINE WINCH AND HYDRAULIC GUIDED |
| Depth capacity* for diamond drilling: B2 3/16″(55,6MM) 3,600 FT (1,100 M) N 2 3/4″ (69.9 MM) 2,600 FT (800 M) H 3 1/2″ (88.9 MM) 1,950 FT (600 M) *Drilling capacity is based on a 45° – 90°. PERFORMANCE 1º to 90º POSITIVE Depth capacity* for diamond drilling: B2 3/16″(55,6MM) 2,460 FT (750 M) N 2 3/4″ (69.9 MM) 1,800 FT (550 M) H 3 1/2″ (88.9 MM) 1,312 FT (400 M) *Drilling capacity is based on a 45° – 90° in negative/ 1º to 90º in positive depend on in -hole tools, ground conditions, drilling techniques and equipament. | The wireline winch is manufactured out of steel and is driven by a low speed, high torque hydraulic motor providing variable speed. CABLE CAPACITY: 3/16” (4.88 MM): 4,000’ (1230 M) PULL CAPACITY: 2,000Lbs (907Kg)MOTOR ELECTRIC: Siemens 100HP SOFT STARTER: Lovato |
| HYDRAULIC MODULE | FEED FRAME AND BASE(with Guarding): |
| Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accesories. This hydraulic system delivers 47 GPM A,1800 RPM. | Head Stroke: 60 inches (1.52M) Pull Capacity: 29,000 lbs @ 3,500 PSI 13,160 kg @ 3,500 PSI Possible drilling angles: 45° to 90° in positive, and negative 0° to -90° |
| ROTARY HEAD, CHUCK AND ROD HOLDER: |
| Holding Capacity (head):26,000 lbs (11,790 kg) |
| Maximum Rod Size:3.5” (89 mm) |
| Chuck Operation: Spring closed and hydraulically opened |
| Final Drive: Gear driven |
| Hydraulic motor: 107cc variable |
| Transmission: Hi-Lo 2 Speed manual |
| Relation speed the rotation: Hi:3.0:1 Low 5.4:1 |
| Lubrication: Pumped oil, filter and cooler |
| Fabrication: Steel |
| Speed: Variable uo to 1500RPM |
| Weight: (Drill) | Lbs. | Kg. |
| Control Panel | 441 | 200 |
| Hyd. & Tank | 302 | 137 |
| Rod Clamp Assembly | 403 | 183 |
| wireline + guide + motor + Hoses | 397 | 180 |
| Complete Tower | 1,113 | 505 |
| Power Unit C/W motor | 1,874 | 850 |
| Drill Head assembly C/W motor and hoses | 871 | 395 |
| extention sheaves | 143 | 65 |
| Skid + base supports inclination | 538 | 244 |
| Tilt Cylinder | 42 | 19 |
| Dispalcement Cylinder Tower | 42 | 19 |
| Total Weight | 6,166 | 2,797 |
English 
Spanish