OVERVIEW:
Duralite Diamond Drills are constructed from only the best quality materials and are designed to be both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to afford the most efficient disassembly, transport, and re-assembly possible. The total operational weight of the Duralite 500BMP is only 5,975lbs (2,716 kg).
SPEC SHEET
| PERFORMANCE | WIRELINE HOIST(with Guarding) |
| Depth capacity* for diamond drilling: B2 3/16″(55.6MM) 1,625ft (500 M) *Drilling capacity is based on a 90° hole and will depend on in-hole tools, ground conditions, drilling techniques and equipment used. | The wireline winch is manufactured out of steel and is driven by a low speed, high torque hydraulic motor providing variable speed. Cable Capacity: 3/16″ (4.88M): 3,000′ (914M) Pull Capacity: 2,000 lbs (907kg) |
| STANDARD ENGINE | Rod Handling Winch (with Guarding): |
| 4 x KUBOTA 40HP at 2,500 RPM (160HP Total) | Cable capacity: 5/16″:100′(30.5M) Pull capacity: 300LBS (136Kg) |
| Hydraulic Module: Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accessories. This hydraulic system delivers 61 GPM at 2,500 RPM. |
| FEED FRAME AND BASE |
| Head stroke: 60 Inches(1.52 M) |
| Pull capacity: 17,000 lbs @ 3,500 PSI |
| Possibly drilling angles: 45° to 90° |
| ROTARY HEAD, CHUCK AND ROD HOLDER: |
| Head Holding Capacity (head): 9,000 lbs (4,091 kg) |
| P Clamp Holding Capacity: 26,000 lbs (11,790 kg) |
| Maximum Rod Size(head): 2.225” (56,5 mm) |
| Maximum Rod Size(clamp): 4.625” (117,5 mm) |
| Chuck Operation: Spring closed and hydraulically opened |
| Final Drive: Gear driven |
| Transmission: Single Speed |
| Gear Ratio: 1.1:1 |
| Lubrication: Gear oil bathe |
| Fabrication: Steel |
| Speed: Variable up to 1,500 RPM |
| Hydraulic Motor: 84CC, 108CC & 205CC |
| Weight | Lbs. |
| Engine 1 (with pump) | 475 |
| Engine 2 (with pump) | 475 |
| Engine 3 (with pump) | 475 |
| Engine 4 (with double pump) | 505 |
| Engine 1 & 2 Foundation(with batteries) | 200 |
| Engine 3 & 4 Foundation (with batteries) | 200 |
| Hyd. Tank (with relief lines) | 445 |
| Hyd. Valve Pack | 420 |
| Tower Base (with 1/2 hinge) | 325 |
| Feed Drame (with 1/2 hinge) | 360 |
| Tower (with sheave wheel) | 280 |
| Wireline winch (with 2000′ cable) | 275 |
| P Rod Clamp and mount | 340 |
| 300 head (with motor and hoses) | 375 |
| Fuel Pack (empty) | 150 |
| Rotation Guard | 45 |
| Stifflegs (set of 2) | 110 |
| Feed cylinder C/W saddle | 240 |
| Pratissoli Pressure Pump(If equipped with FMC add 260lbs) | 280 |
| Total Weight | 5,975 |
English 
Spanish