OVERVIEW:
Duralite Diamond Drills are constructed from only the best quality materials and are designed to be both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to afford the most efficient disassembly, transport, and re-‐assembly possible. The total operational weight of the Duralite 800NMP is only 7,520lbs (3,407 kg).
SPEC SHEET
| PERFORMANCE | WIRELINE HOIST(with Guarding) |
| Depth capacity* for diamond drilling: B2 3/16″(55.6MM) 3,575ft (1,100 M) N 2-3/4″ (69,9MM) 2,600ft (800M) H 3-1/2″ (88,9M) 1,950ft (600M) *Drilling capacity is based on a 45° – 90° hole and will depend on in-hole tools, ground conditions, drilling techniques and equipment used. | The wireline winch is manufactured out of aluminum and is driven by a low speed, high torque hydraulic motor providing variable speed. CABLE CAPACITY: 3/16″ (4.88M):4,000′(1,219M) PULL CAPACITY: 2,000Lbs (907Kg) |
| STANDARD ENGINE | Rod Handling Winch (with Guarding): |
| 4 x 44 hp Kubota Mechanical Diesel engines | Cable capacity: 5/16″:100′(30.5M) Pull capacity: 300LBS (136Kg) |
| HYDRAULIC MODULE | FEED FRAME AND BASE(with Guarding): |
| Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accessories. This hydraulic system delivers 63 GPM at 2,500 RPM. | Head Stroke: 60 Inches (1.52M) Pull Capacity: 29,000 lbs@3,500 PSI ; 13,150 kg @3,500 PSI Possible drilling angles: 45° to 90° |
| ROTARY HEAD, CHUCK AND ROD HOLDER: |
| Holding Capacity (head): 26,000 lbs (11,790 kg) |
| Maximum Rod Size (head): H -3,5” (89 mm) |
| Chuck Operation: Spring closed and hydraulically opened |
| Final Drive: Gear driven |
| Hydraulic motor: 107CC Variable displacement |
| Transmission: Hi-Lo 2 Speed manual |
| Gear Ratio: High: 3.0:1 Low:5.4:1 |
| Lubrication: Pumped oil, filter and cooler |
| Fabrication: Steel |
| Speed: Variable up to 1,500 RPM |
| Max Rod Size (Clamp): P-4.625″ (117 mm) |
| Weight | Lbs. | Kg. |
| Engine 1 (with pump) | 475 | 215 |
| Engine 2 (with pump) | 475 | 215 |
| Engine 1 (with pump) | 475 | 215 |
| Engine 4 (with double pump) | 505 | 229 |
| Engine 1 & 2 Foundation (w/batteries) | 200 | 91 |
| Engine 3 & 4 Foundation (w/batteries) | 200 | 91 |
| Hyd. Tank Console (with relief lines) | 485 | 220 |
| Hyd. Valve Pack | 475 | 215 |
| Tower Base (w/ 1/2 hinge) & Tower rest) | 530 | 240 |
| Feed Frame (w 1/2 hinge) | 505 | 229 |
| Feed Frame Saddle w/head mount | 260 | 118 |
| Feed Cylinder | 240 | 109 |
| Tower (w/ Sheave wheel & Rod Winch) | 425 | 192 |
| B20 Head (without motor and jaws) | 745 | 337 |
| Rotation Motor | 105 | 47 |
| P Rod Clamp and mount | 380 | 172 |
| Wireline Winch (w/3000’/1000M cable) | 450 | 204 |
| Rotation Guard | 50 | 23 |
| Stifflegs (set of 2) | 110 | 50 |
| Pratissoli Pressure Pump*add 260lbs form FMC435) | 280 | 127 |
| Fuel pack (empty) | 150 | 68 |
| Total Weight | 7,520 | 3,407 |
English 
Spanish