OVERVIEW:
Duralite Diamond Drills are constructed from only the best quality materials and are designed to be both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to afford the most efficient disassembly, transport, and re-assembly possible. The total operational weight of the Duralite 1800N is only 9770lbs (4432kg).
SPEC SHEET
| PERFORMANCE | WIRELINE HOIST(with Guarding) |
| Depth capacity* for diamond drilling: N 2-3/4″ (69,9MM) 5,905ft (1,800M) H 3-1/2″ (88,9M) 23,937ft (1200M) P 45/8″(117.5MM) 2,624ft (800 M) *Drilling capacity is based on a 90° hole and will depend on in-hole tools, ground conditions, drilling techniques and equipment used. | The wireline winch is manufactured out of aluminum and is driven by a low speed, high torque hydraulic motor providing variable speed. CABLE CAPACITY: 3/16″ (4.88M): 6,000′(1,830M) PULL CAPACITY: 2,000Lbs (907Kg) |
| STANDARD ENGINE | Rod Handling Winch (with Guarding): |
| Diesel John Deere 200Hp at 2,400 RPM | Cable capacity: 5/16″ :100′ (30.5M) Pull capacity: 300LBS (136Kg) |
| HYDRAULIC MODULE | FEED FRAME AND BASE(with Guarding): |
| Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accessories. This hydraulic system delivers 91 GPM at 2,400 RPM. | Head Stroke: 72 Inches (1.85M) Pull Capacity: 50,240 lbs@4,000 PSI Possible drilling angles: 45° to 90° |
| ROTARY HEAD, CHUCK AND ROD HOLDER: |
| Holding Capacity (head): 45,000 lbs (20,455 kg) |
| Maximum Rod Size (head): 4,625” (117.5 mm) |
| Chuck Operation: Spring closed and hydraulically opened |
| Final Drive: Chain driven |
| Hydraulic motor: Variable (160CC) |
| Transmission: 4-speed funk transmission |
| Gear Ratio: Head: 2.4:1 |
| Transmission: 1st Gear – 6.63:1 2nd Gear – 3.17:1 3rd Gear – 1.72:1 4th Gear – 1:1 |
| Lubrication: Gear Oil Bath |
| Fabrication: Steel |
| Speed: Variable up to 1,500 RPM |
| Weight | Lbs. |
| Power Unit C/W Guarding | 1,820 |
| Hydraulic Module | 1,690 |
| Feed frame with saddle & ½ hinge | 1,660 |
| Tower base with ½ hinge w/o winch | 1,040 |
| Wireline Winch w/o cable | 330 |
| Tower with Rod Winch | 475 |
| Drill head assembly w/motor & hoses (AVD P) | 1,555 |
| Rod clamp assembly | 450 |
| Rod Clamp Mount | 150 |
| Foundation beams | 200 |
| Stiff Legs (Set of 2) | 120 |
| Pratissoli KF40 Pressure Pump( +260 for FMC) | 280 |
| Total Weight | 9,770 |
English 
Spanish