Lighten Your Load


OUR PRODUCTS

DURALITE UG800N – SPEC SHEET

Overview:

Duralite Diamond Drills are constructed from only the best materials and are designed to the both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to affort the most efficient disassembly, transport, and re-assembly posible. The total operationaL wight of the Duralite UG 800N is the 6,166lbs (2797kg).
PERFORMANCE 45º to 90º NEGATIVE WIRELINE WINCH AND HYDRAULIC GUIDED
Depth capacity* for diamond drilling:
B2 3/16"(55,6MM) 3,600 FT (1,100 M)
N 2 3/4" (69.9 MM) 2,600 FT (800 M)
H 3 1/2" (88.9 MM) 1,950 FT (600 M)

*Drilling capacity is based on a 45° - 90°.

PERFORMANCE 1º to 90º POSITIVE
Depth capacity* for diamond drilling:
B2 3/16"(55,6MM) 2,460 FT (750 M)
N 2 3/4" (69.9 MM) 1,800 FT (550 M)
H 3 1/2" (88.9 MM) 1,312 FT (400 M)

*Drilling capacity is based on a 45° - 90° in negative/ 1º to 90º in positive depend on in -hole tools, ground conditions, drilling techniques and equipament.
The wireline winch is manufactured out of steel and is driven by a low speed, high torque hydraulic motor providing variable speed.

CABLE CAPACITY: 3/16” (4.88 MM): 4,000’ (1230 M)

PULL CAPACITY: 2,000Lbs (907Kg)
MOTOR ELECTRIC: Siemens 100HP

SOFT STARTER: Lovato

HYDRAULIC MODULE FEED FRAME AND BASE(with Guarding):
Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accesories. This hydraulic system delivers 47 GPM A,1800 RPM.
Head Stroke: 60 inches (1.52M)
Pull Capacity:
29,000 lbs @ 3,500 PSI
13,160 kg @ 3,500 PSI
Possible drilling angles:
45° to 90° in positive, and negative 0° to -90°
ROTARY HEAD, CHUCK AND ROD HOLDER:
Holding Capacity (head):26,000 lbs (11,790 kg)
Maximum Rod Size:3.5” (89 mm)
Chuck Operation: Spring closed and hydraulically opened
Final Drive: Gear driven
Hydraulic motor: 107cc variable
Transmission: Hi-Lo 2 Speed manual
Relation speed the rotation: Hi:3.0:1 Low 5.4:1
Lubrication: Pumped oil, filter and cooler
Fabrication: Steel
Speed: Variable uo to 1500RPM
Weight: (Drill) Lbs. Kg.
Control Panel 441 200
Hyd. & Tank 302 137
Rod Clamp Assembly 403 183
wireline + guide + motor + Hoses 397 180
Complete Tower 1,113 505
Power Unit C/W motor 1,874 850
Drill Head assembly C/W motor and hoses 871 395
extention sheaves 143 65
Skid + base supports inclination 538 244
Tilt Cylinder 42 19
Dispalcement Cylinder Tower 42 19
Total Weight 6,166 2,797

CONTACT US

CANADA

8 Main Street Triton, NL, Canada A0J 1V0
T: (709) 263-7221
F: (709-263-7231
E: duralitedrills@nf.sympatico.ca

COLOMBIA

Calle 60 Sur # 43A - 28
Sabaneta - Antioquia
TEL.:+57 (311) 380 6951
E-mail: ana.garcia@duralite.ca

MÉXICO

C. Rosales # 11, Proyecto Rio Sonora, Hermosillo
Sonora, México
TEL.:+52 (662) 250 8867 / +52 (662) 251 6051
E-mail: info@duralitemexico.com

Copyright © Duralite Diamond Drills 2016