Lighten Your Load


OUR PRODUCTS

DURALITE 500BMP – SPEC SHEET

Overview:

Duralite Diamond Drills are constructed from only the best quality materials and are designed to be both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to afford the most efficient disassembly, transport, and re-assembly possible. The total operational weight of the Duralite 500BMP is only 5,975lbs (2,716 kg).
PERFORMANCE WIRELINE HOIST(with Guarding)
Depth capacity* for diamond drilling:
B2 3/16"(55.6MM) 1,625ft (500 M)

*Drilling capacity is based on a 90° hole and will depend on in-hole tools, ground conditions, drilling techniques and equipment used.
The wireline winch is manufactured out of steel and is driven by a low speed, high torque hydraulic motor providing variable speed.
Cable Capacity: 3/16" (4.88M): 3,000' (914M)
Pull Capacity: 2,000 lbs (907kg)
STANDARD ENGINE Rod Handling Winch (with Guarding):
4 x KUBOTA 40HP at 2,500 RPM (160HP Total)
Cable capacity: 5/16":100'(30.5M)
Pull capacity: 300LBS (136Kg)
Hydraulic Module: Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accessories. This hydraulic system delivers 61 GPM at 2,500 RPM.
FEED FRAME AND BASE
Head stroke: 60 Inches(1.52 M)
Pull capacity: 17,000 lbs @ 3,500 PSI
Possibly drilling angles: 45° to 90°
ROTARY HEAD, CHUCK AND ROD HOLDER:
Head Holding Capacity (head): 9,000 lbs (4,091 kg)
P Clamp Holding Capacity: 26,000 lbs (11,790 kg)
Maximum Rod Size(head): 2.225” (56,5 mm)
Maximum Rod Size(clamp): 4.625” (117,5 mm)
Chuck Operation: Spring closed and hydraulically opened
Final Drive: Gear driven
Transmission: Single Speed
Gear Ratio: 1.1:1
Lubrication: Gear oil bathe
Fabrication: Steel
Speed: Variable up to 1,500 RPM
Hydraulic Motor: 84CC, 108CC & 205CC
Weight Lbs.
Engine 1 (with pump) 475
Engine 2 (with pump) 475
Engine 3 (with pump) 475
Engine 4 (with double pump) 505
Engine 1 & 2 Foundation(with batteries) 200
Engine 3 & 4 Foundation (with batteries) 200
Hyd. Tank (with relief lines) 445
Hyd. Valve Pack 420
Tower Base (with 1/2 hinge) 325
Feed Drame (with 1/2 hinge) 360
Tower (with sheave wheel) 280
Wireline winch (with 2000' cable) 275
P Rod Clamp and mount 340
300 head (with motor and hoses) 375
Fuel Pack (empty) 150
Rotation Guard 45
Stifflegs (set of 2) 110
Feed cylinder C/W saddle 240
Pratissoli Pressure Pump(If equipped with FMC add 260lbs) 280
Total Weight 5,975

CONTACT US

CANADA

8 Main Street Triton, NL, Canada A0J 1V0
T: (709) 263-7221
F: (709-263-7231
E: duralitedrills@nf.sympatico.ca

COLOMBIA

Calle 60 Sur # 43A - 28
Sabaneta - Antioquia
TEL.:+57 (311) 380 6951
E-mail: ana.garcia@duralite.ca

MÉXICO

C. Rosales # 11, Proyecto Rio Sonora, Hermosillo
Sonora, México
TEL.:+52 (662) 250 8867 / +52 (662) 251 6051
E-mail: info@duralitemexico.com

Copyright © Duralite Diamond Drills 2016