Lighten Your Load


OUR PRODUCTS

DURALITE 1800N – SPEC SHEET

Overview:

Duralite Diamond Drills are constructed from only the best quality materials and are designed to be both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to afford the most efficient disassembly, transport, and re-assembly possible. The total operational weight of the Duralite 1800N is only 9770lbs (4432kg).
PERFORMANCE WIRELINE HOIST(with Guarding)
Depth capacity* for diamond drilling:
N 2-3/4" (69,9MM) 5,905ft (1,800M)
H 3-1/2" (88,9M) 23,937ft (1200M)
P 45/8"(117.5MM) 2,624ft (800 M)

*Drilling capacity is based on a 90° hole and will depend on in-hole tools, ground conditions, drilling techniques and equipment used.
The wireline winch is manufactured out of aluminum and is driven by a low speed, high torque hydraulic motor providing variable speed.

CABLE CAPACITY: 3/16" (4.88M): 6,000'(1,830M)

PULL CAPACITY: 2,000Lbs (907Kg)
STANDARD ENGINE Rod Handling Winch (with Guarding):
Diesel John Deere 200Hp at 2,400 RPM
Cable capacity: 5/16" :100' (30.5M)
Pull capacity: 300LBS (136Kg)
HYDRAULIC MODULE FEED FRAME AND BASE(with Guarding):
Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accessories. This hydraulic system delivers 91 GPM at 2,400 RPM.
Head Stroke: 72 Inches (1.85M)
Pull Capacity: 50,240 lbs@4,000 PSI
Possible drilling angles: 45° to 90°
ROTARY HEAD, CHUCK AND ROD HOLDER:
Holding Capacity (head): 45,000 lbs (20,455 kg)
Maximum Rod Size (head): 4,625” (117.5 mm)
Chuck Operation: Spring closed and hydraulically opened
Final Drive: Chain driven
Hydraulic motor: Variable (160CC)
Transmission: 4-speed funk transmission
Gear Ratio: Head: 2.4:1
Transmission: 1st Gear – 6.63:1
2nd Gear – 3.17:1
3rd Gear – 1.72:1
4th Gear – 1:1
Lubrication: Gear Oil Bath
Fabrication: Steel
Speed: Variable up to 1,500 RPM
Weight Lbs.
Power Unit C/W Guarding 1,820
Hydraulic Module 1,690
Feed frame with saddle & ½ hinge 1,660
Tower base with ½ hinge w/o winch 1,040
Wireline Winch w/o cable 330
Tower with Rod Winch 475
Drill head assembly w/motor & hoses (AVD P) 1,555
Rod clamp assembly 450
Rod Clamp Mount 150
Foundation beams 200
Stiff Legs (Set of 2) 120
Pratissoli KF40 Pressure Pump( +260 for FMC) 280
Total Weight 9,770

OUR PRODUCTS


CONTACT

CANADA

26 Main Street Triton, NL
Canada A0J 1V0
T: +1(709) 263-7231
E: Jerry.jones@duralitediamonddrills.com

COLOMBIA

KM 27 Parcelación La Candelaria Casa # 77
El Retiro - Antioquia
TEL.:+57 (311) 380 6951
E-mail: ana.garcia@duralitediamonddrills.com