Lighten Your Load


OUR PRODUCTS

DURALITE 1000N – SPEC SHEET

Overview:

Duralite Diamond Drills are constructed from only the best quality materials and are designed to be both durable and lightweight. All aspects of the drill have been designed to ensure maximum safety for the user(s). Considerable attention has been given to the size and weight of every component to afford the most efficient disassembly, transport, and re-assembly possible. The total operational weight of the Duralite 1000N is only 9,295lbs (4,215 kg).
PERFORMANCE WIRELINE HOIST(with Guarding)
Depth capacity* for diamond drilling:
B2 3/16"(55.6MM) 4,265ft (1,300 M)
N 2-3/4" (69,9MM) 3,281ft (1,000M)
H 3-1/2" (88,9M) 2,559ft (780M)

*Drilling capacity is based on a 45° - 90° hole and will depend on in-hole tools, ground conditions, drilling techniques and equipment used.
The wireline winch is manufactured out of aluminum and is driven by a low speed, high torque hydraulic motor providing variable speed.

CABLE CAPACITY: 3/16" (4.88M): 4,500'(1,372M)

PULL CAPACITY: 2,000Lbs (907Kg)
STANDARD ENGINE Rod Handling Winch (with Guarding):
Diesel John Deere 170Hp at 2,200 RPM
Cable capacity: 3/8" :100' (30.5M)
Pull capacity: 300LBS (136Kg)
HYDRAULIC MODULE FEED FRAME AND BASE(with Guarding):
Our proven hydraulic system is an open center, vented tank system, constructed using only top brand name pumps, valves, and accessories. This hydraulic system delivers 71 GPM at 2,200 RPM.
Head Stroke: 60 Inches (1.52M)
Pull Capacity: 29,000 lbs@3,500 PSI
; 13,150 kg @3,500 PSI
Possible drilling angles: 45° to 90°
ROTARY HEAD, CHUCK AND ROD HOLDER:
Holding Capacity (head): 26,000 lbs (11,790 kg)
Maximum Rod Size (head): 3,5” (89 mm)
Chuck Operation: Spring closed and hydraulically opened
Final Drive: Gear driven
Hydraulic motor: Variable (160CC)
Transmission: Hi-Lo 2 Speed manual
Gear Ratio: High: 3.0:1 Low:5.4:1
Lubrication: Pumped oil, filter and cooler
Fabrication: Steel
Speed: Variable up to 1,500 RPM
Weight Lbs. Kg.
Power Unit C/W Guarding 1,715 778
Hydraulic Module 1,590 721
Feed frame with mounts 1,480 671
Tower base C/W winches (no cable)
(+ 350lbs for cable)
820 372
Tower 570 258
Drill head assembly C/W motor & hoses (B20) 1,100 499
Rod clamp assembly 230 104
Fibreglass floors 1,160 526
Foundation beams 630 286
Total Weight 9,295 4,215

CONTACT US

CANADA

8 Main Street Triton, NL, Canada A0J 1V0
T: (709) 263-7221
F: (709-263-7231
E: duralitedrills@nf.sympatico.ca

COLOMBIA

Calle 60 Sur # 43A - 28
Sabaneta - Antioquia
TEL.:+57 (311) 380 6951
E-mail: ana.garcia@duralite.ca

MÉXICO

C. Rosales # 11, Proyecto Rio Sonora, Hermosillo
Sonora, México
TEL.:+52 (662) 250 8867 / +52 (662) 251 6051
E-mail: info@duralitemexico.com

Copyright © Duralite Diamond Drills 2016